Tamiya 58728 Super Sabre (2023)
by Tamiya
SKU TAM58728
Original price
$346.95
-
Original price
$346.95
Original price
$346.95
$346.95
-
$346.95
Current price
$346.95
At the Sharp End
This R/C model assembly kit is a re-released and updated version of the Super Sabre, a beginner-friendly buggy released in 1987. It is based upon a bathtub frame chassis with 4WD and CVA oil dampers: a recipe for off-road success enhanced by gripps hybrid tires. The aerodynamic polycarbonate body is pre-painted and pre-cut, and really looks the part on this speedy model.
Capable Off-Road Chassis
This shaft-driven 4WD chassis has a midship motor and sealed front and rear gearboxes, each containing a differential gear for smooth cornering. It is broken down into three easily-maintained sections: bathtub frame and gearboxes, and features short CVA oil dampers on the double-wishbone suspension, plus a front stabilizer to combat roll. Oval block/pin spike hybrid tires deliver superb grip, and together with the efficient 4WD make the Super Sabre right at home off-road.
Key Features:
1/10 scale R/C model assembly kit. Updated version of the Super Sabre, a beginner-friendly buggy originally released in 1987. Length: 390mm, width: 234mm, height: 135mm.
The 0.7mm thick polycarbonate is fitted with the separate wing part and is pre- cut and pre-painted in silver.
Shaft-driven 4WD.
4-wheel independent double wishbone suspension employs CVA short dampers II with a front stabilizer to help get the most out of the 4-wheel drive system.
ABS bathtub frame and other reinforced parts give superb durability and simplified maintenance.
Gearboxes are sealed to keep out dirt and contain differentials for smooth cornering.
Now Includes Pre-cut and Pre-Painted Body! Simply Apply your decals and paint your driver figure as you like.
Includes 540 brushed type motor
What's In The Box?
Tamiya 1/10 2023 re-release RC Super Sabre Kitset
Pre-Cut and Pre-Painted Body Shell
Decal Sheet
Assembly Instructions
Required for Operation (Not Included)
2-channel radio & Receiver
Steering servo
Electronic Speed Controller
7.2-7.4volt battery pack Compatible charger
Tools
This buggy refines wedge-shaped bodies to an artform!
A look at the shaft-driven 4WD chassis with ABS plastic bathtub frame and midship motor.
Red uprights add a splash of color to the suspension; this picture shows the front setup.
The front has a monoshock setup with an oil damper and stabilizer.
Wide H arms are employed at the rear with dual CVA oil dampers and dog bone drive shafts.
A close-up on the rear double wishbone suspension with its CVA short dampers II.
A dust cover for the steering servo and a chassis cover help keep dust and dirt away from critical areas.
This R/C model assembly kit is a re-released and updated version of the Super Sabre, a beginner-friendly buggy released in 1987. It is based upon a bathtub frame chassis with 4WD and CVA oil dampers: a recipe for off-road success enhanced by gripps hybrid tires. The aerodynamic polycarbonate body is pre-painted and pre-cut, and really looks the part on this speedy model.
Capable Off-Road Chassis
This shaft-driven 4WD chassis has a midship motor and sealed front and rear gearboxes, each containing a differential gear for smooth cornering. It is broken down into three easily-maintained sections: bathtub frame and gearboxes, and features short CVA oil dampers on the double-wishbone suspension, plus a front stabilizer to combat roll. Oval block/pin spike hybrid tires deliver superb grip, and together with the efficient 4WD make the Super Sabre right at home off-road.
Key Features:
1/10 scale R/C model assembly kit. Updated version of the Super Sabre, a beginner-friendly buggy originally released in 1987. Length: 390mm, width: 234mm, height: 135mm.
The 0.7mm thick polycarbonate is fitted with the separate wing part and is pre- cut and pre-painted in silver.
Shaft-driven 4WD.
4-wheel independent double wishbone suspension employs CVA short dampers II with a front stabilizer to help get the most out of the 4-wheel drive system.
ABS bathtub frame and other reinforced parts give superb durability and simplified maintenance.
Gearboxes are sealed to keep out dirt and contain differentials for smooth cornering.
Now Includes Pre-cut and Pre-Painted Body! Simply Apply your decals and paint your driver figure as you like.
Includes 540 brushed type motor
What's In The Box?
Tamiya 1/10 2023 re-release RC Super Sabre Kitset
Pre-Cut and Pre-Painted Body Shell
Decal Sheet
Assembly Instructions
Required for Operation (Not Included)
2-channel radio & Receiver
Steering servo
Electronic Speed Controller
7.2-7.4volt battery pack Compatible charger
Tools
This buggy refines wedge-shaped bodies to an artform!
A look at the shaft-driven 4WD chassis with ABS plastic bathtub frame and midship motor.
Red uprights add a splash of color to the suspension; this picture shows the front setup.
The front has a monoshock setup with an oil damper and stabilizer.
Wide H arms are employed at the rear with dual CVA oil dampers and dog bone drive shafts.
A close-up on the rear double wishbone suspension with its CVA short dampers II.
A dust cover for the steering servo and a chassis cover help keep dust and dirt away from critical areas.