Traxxas 101076-4 Ford F-150 Raptor R

Traxxas 101076-4: Ford F-150 Raptor R

 1/10 scale 4X4 short course truck, fully-assembled, waterproof electronics, Ready-To-Race, with TQi 2.4 GHz 2-channel radio system, Traxxas Stability Management, VXL-3s speed control, and clipless painted Pro Scale body. Requires: battery and charger.

What?s In The Box:
Raptor R with Velineon? VXL-3s ESC and 3500 kV motor
Quick Start Guide
TQi 2.4 GHz radio system
High quality maintenance tools

What You?ll Need:
Batteries
Raptor R requires a single NiMH or LiPo battery.
Charger
Traxxas EZ-Peak Live charger (2971) is recommended for easy and fast charging performance.
Four AA alkaline batteries for the transmitter.

Batteries & Charger are not included, these are the compatible batteries and chargers:

Compatible Lipo Batteries:

• Traxxas 2849X - 4000mah 11.1v 3-Cell 25C LiPO Battery w/ID
• Traxxas 2869X - 7600Mah 7.4V 2-Cell 25C Lipo Battery
• Traxxas 2872X - 5000mAh 11.1V 3-Cell 25C LiPo Battery
• Helios 11.1V 3S 5200mAh LiPo with Traxxas Plug

Compatible Nimh Batteries:

• Traxxas 2923X - Battery, Power Cell, 3000mAh (NiMH, 7-C flat, 8.4V)
• Traxxas 2940X - Battery, Series 3 Power Cell, 3300Mah (Nimh, 7-C Flat, 8.4V)
• Traxxas 2950X - Series 4 NiMH 7-Cell 4200mAh Flat w/iD Conn
• Traxxas 2960X - Series 5 NiMH 7-Cell 5000mAh Battery Flat w/iD Conn

Compatible Chargers:

• Traxxas 2970 - Ez-Peak Plus 4-Amp Nimh/Lipo Fast Charger With Id Auto
• Traxxas 2971 - EZ-Peak Live 100W NiMH/LiPo charger (2971A)
• Traxxas 2972 - Charger, EZ-Peak Dual, 100W, NiMH/LiPo with iD Auto Battery Identification
• Traxxas 2973 EZ-Peak Live Multi-Chemistry Battery Charger w/Auto iD (4S/26A/200W)
• Traxxas 2975 - Charger, DC, 4 amp (6 - 7 cell, 7.2 - 8.4 volt, NiMH)
• Traxxas 2981 - EZ-Peak Plus 4s Charger

Completer Packs:

• Traxxas 2983 - 8.4v 3000mah (long) Battery/Charger Completer Pack
• Traxxas 2992 - 2s Battery/Charger Completer Pack (Includes #2970 Id Charger (1), #2843X 5800Mah 7.4V 2-Cell 25C Lipo Battery (1))

NB: Some batteries may require a battery expansion kit to fit properly.

Features:
Officially Licensed Ford F-150 Raptor R Clipless Pro Scale Body
Molded scale details: bumpers, grille, tailgate, side mirrors, and hood vent
LED lighting in front and rear bumpers
Body reinforcements to prevent pull-through damage
Clipless Body Mounting
Holds tight for intense action
5mm output shaft
Quick and easy removal
Smooth appearance with no body posts or clips
Extreme Heavy Duty Upgrade Kit Installed
Strengthened C-hubs, axle carriers, steering blocks, and shock towers
Extreme heavy duty driveshafts
Oversize diameter
6mm axles
Steel wheel hexes
VXL-3s Waterproof Electronic Speed Control
Cooling fan with large heat sink
Three Programmable Drive Profiles
Sport Mode - Forward / Brake / Reverse
Race Mode - Forward / Brake
Training Mode - 50% Forward / Brake / 50% Reverse (patented)
Traxxas EZ-Set one-button setup
Built-in two-stage low-voltage detection for LiPo batteries
NiMH battery packs: 4-9 cells (4.8 to 10.8 volts)
LiPo battery packs: 2-3 cells (7.4 to 11.1 volts)
Up to 60+ mph with 3s LiPo battery
Traxxas Stability Management? (TSM)
Improves straight line acceleration and braking on low-traction surfaces
Maintains steering composure to allow throttle-on powerslides
Never dulls throttle or slows the truck
Adjusts from off to 100% assistance from the transmitter
TQi 2.4GHz High Output Radio System
TQi 2-channel transmitter
Automatically stores and loads settings for up to 30 Traxxas Link-enabled models
Programmable multi-function knob
Adjustable steering and throttle percentage (dual rates)
Adjustable steering and throttle sensitivity (exponential)
Adjustable steering and throttle end points
High 13ms frame rate and near-zero latency for responsive control
5-channel micro receiver (#6533) with fail-safe security
Patented waterproof receiver box with easy-access plug
Suspension
Heavy duty suspension arms
Adjustable 4 mm steel toe and camber links
Oil-filled Ultra Shocks
White powder-coated progressive springs
Velineon? 3500 kV Brushless Motor
Ultra high-temperature sintered Neodymium magnets
Optimized for power and efficiency in 1/10th scale vehicles
Efficient, high-speed ball bearings
Precision-balanced rotor
3500 kV
Brilliant blue-anodized finish
Chassis
Extended modular composite tub design
Secure battery hold-down latch
Side nerf bars for impact resistance
Steering
Chassis-mounted #2075 servo
Dual bellcrank design with integrated servo saver
Drivetrain
Full-time shaft-driven 4-wheel drive
Oil-filled steel gear front and rear differentials
Large 32-pitch steel spur gear
Anodized-aluminum center driveshaft
Wheels and Tires
Licensed Ford replica option wheels
2? outer diameter, 3? inner diameter
Licensed BFGoodrich All-Terrain T/A KO2 tires
Larger 114 mm diameter
Sealed Ball Bearings
Hex hardware with Rust-Resistant Black Oxide Coating